top of page

ZERO WASTE PROJECT

eco

Features

  • The body is made of 2.00 mm sheet metal, bent as a single piece, pressed and shaped, and its strength is increased. The base corners are radiused. The assembly of the body sheet metal and the side sheets is made by externally mounting the body sheet metal with a 20.00 mm wide bent protrusion or lip formed by pressing on the edges of the side sheets, and welding the radii completely without interruption.

  • The body weld and other welds were welded with gas metal arc welding technique without slag.

  • The body mouth is surrounded by a 'U' profile with internal tabs measuring 30x50x2.5 mm.

  • Lifting arms suitable for the lifting apparatus on the vehicle are 45.00 x 10.00 cm in size and are drilled from 4.00 mm sheet metal and 18.00 mm round arms are welded from the top and bottom to the body.

  • The lid is manufactured from a single piece of 1.20 mm sheet metal, press-formed and given a strength-enhancing form, so that its edges completely cover the container mouth, and is mounted to the body with a hinge.

  • The carrier has 4 160x45 mm wide-span, 360-degree rotating casters with a fork plate of 4.00 mm, in accordance with TS EN 12532 standard. The wheel connection foot plate is 4.00 mm.

  • The inside and outside of the container, including the lid, are completely galvanized with the Hot Dip Galvanizing system in accordance with TS EN ISO 1461 standard.

  • Container has TS EN 840-3 Standard Conformity Certificate and ± 5% tolerance.

Technical Drawing

1000-lt-sicak-daldirma-galvanizli-yari-kubbe-kapakli-cop-konteyneri-teknik.webp
bottom of page