Zero Waste Project
Features
-
The body is made of 2.00 mm sheet metal, bent as a single piece, pressed and shaped, and its strength is increased. The base corners and the upper rear mouth are radiused. The assembly of the side sheets manufactured from the same sheet metal as the body sheet metal, the bent protrusion or lip of at least 15.00 mm width formed by pressing on the edges of the side sheets, including all the surroundings and radii, this protrusion and the side sheets and the body sheet metal are seamlessly welded from the outside, including the radii.
-
The body welding and other welds were made with the gas metal arc technique, without slag, by continuous welding and in a way that the body would not leak water.
-
Lifting arms suitable for the lifting apparatus on the vehicle were drilled from 4.00 mm sheet metal with a size of 45x10 cm, a 16.00 mm round arm was welded to the sheet metal from the top and bottom, and the sheet metal was welded to the body.
-
The container cover is made of 1.50 mm sheet metal, in the form of a cover system that can be opened around its own axis. The cover is a single piece and has an opening handle, a stop and a locking system. In addition, there are internal strength-enhancing profile reinforcements on the cover.
-
The body mouth is surrounded by self-bending of body and side sheets in the dimensions of 25.00x50.00x2.00 mm. There is no welding on the mouth except for the corner joint. The lower part of the profile is made by method welding.
-
The carrier has 4 160x45 mm wide-swinging 360-degree rotating wheels with a fork plate of 4.00 mm, in accordance with TS EN 12532 standard. The wheel connection foot plate is 4.00 mm.
-
The inside and outside of the container, including the lid, are completely galvanized with the Hot Dip Galvanizing system in accordance with TS EN ISO 1461 standard.
-
The name of the municipality, a human figure throwing garbage and the slogan 'Let's Keep Our Environment Clean' are written on the front surface.
-
The container has a TS EN 840-3 Standard Conformity Certificate.