top of page

ZERO WASTE PROJECT

eco

Features

  • Body 1.50 mm. It is formed by bending and pressing as a single piece of sheet metal and its strength is increased. Base corners have radius. The assembly of the body sheet and side sheets is made by pressing on the edges of the side sheets with a thickness of 20.00 mm. It is mounted externally to the body sheet with a wide bent protrusion or lip and is completely welded, including the radii, without interruption.

  • The body weld and other welds were welded without slag using the gas arc technique.

  • The body mouth is completely surrounded by a pipe profile.

  • Lift arms and cover connection 2.50 mm. It is welded onto the sheet metal apparatus and screwed onto the body.

  • Lift arms are manufactured in accordance with EN standards. Cover arms 3.00 mm. is.

  • Cover 1.40 mm. It is manufactured from sheet metal as a system that can be opened around its own axis. The cover is given a strength-increasing form, and the cover movement has a coil spring and a stop mechanism. There is a rubber profile on the lid mouth.

  • Carrier 4 pieces 360 degrees 200x50 mm. size, wide fork, 2 brakes and fork plate 4.00 mm. Wheels complying with the TS EN 12532 standard are available. Wheel connection foot plate 4.00 mm. is.

  • The interior and exterior of the container, including the lid, are galvanized in accordance with the TS EN ISO 1461 standard with the Hot Dip Galvanizing system.

  • Container has TS EN 840-3 Standard Conformity Certificate, ± 5% tolerance.

Technical Drawing

770-lt-sicak-daldirma-galvanizli-kubbe-kapakli-cop-konteyneri-teknik.webp
bottom of page